Daytime Light Operation
WARNING: This page is about a different car, the 2006 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
With the engine running and the lighting switch in the "OFF" or parking lamp (1ST) position and parking brake released, power is supplied
- to daytime light control unit terminal 3
- through daytime light control unit terminal 6
- to LH headlamp terminal HI
- through LH headlamp terminal E
- to daytime light control unit terminal 7
- through daytime light control unit terminal 8
- to RH headlamp terminal HI.
Ground is supplied
- to RH headlamp terminal E
- through body grounds E7 and E37.
Because the high beam headlamps are wired in series during daytime light operation, they operate at half illumination.