CD Autochanger
WARNING: This page is about a different car, the 2006 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Owner's Manual for CD autochanger operating instructions.
Power is supplied at all times:
- through 15A fuse [No. 32, located in the fuse and fusible link box]
- to CD autochanger terminal 4.
With the ignition switch in the ACC or ON position, power is supplied:
- through 10A fuse [No. 1, located in the fuse block (J/B)]
- to CD autochanger terminal 6.
Ground is supplied through the case of the CD autochanger.
Audio signals are supplied:
- through CD autochanger terminals 1,2,7 and 8
- to audio unit terminals 41, 42, 43 and 44.