CVT Fluid Temperature Sensor

WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Disconnect CVT unit harness connector.

Check resistance between CVT unit harness connector terminals.

CONNECTOR TERMINAL RESISTANCE CHART

Name	Connector	Terminal	Temperature °C (°F)	Resistance (Approx.)
CVT fluid temperature sensor	F46	17 - 19	20 (68)	6.5 kΩ
CVT fluid temperature sensor	F46	17 - 19	80 (176)	0.9 kΩ

Fig 1: Checking Resistance Between CVT Unit Harness Connector Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, replace the transaxle assembly. Refer to "REMOVAL AND INSTALLATION (MR20DE) ".