LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Continuously Variable Transmission (CVT)) >> Service Information >> DTC P0744 A/T TCC S/V Function (Lock-Up) >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Always drive vehicle at a safe speed.
NOTE: If "DTC Confirmation Procedure" has been previously performed, always turn ignition switch OFF and wait at least 10 seconds before performing the next test.

After the repair, touch "ERASE" on "SELF-DIAG RESULTS" and then perform the following procedure to confirm the malfunction is eliminated.

WITH CONSULT-III 

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III.
  3. Start engine and maintain the following condition for at least 30 seconds.

    ACC PEDAL OPEN: More than 1.0/8 

    RANGE: "D" position 

    [Vehicle speed: Constant speed of more than 40 km/h (25 MPH)] 

  4. If DTC is detected go to "DIAGNOSIS PROCEDURE ".

WITH GST 

Follow the procedure "WITH CONSULT-III".

scientia non olet · About LEMON Manuals