DTC Confirmation Procedure
WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If "DTC Confirmation Procedure" has been previously performed, always turn ignition switch OFF and wait at least 10 seconds before performing the next test.
After the repair, perform the following procedure to confirm the malfunction is eliminated.
WITH CONSULT-III
- Turn ignition switch ON.
- Select "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III.
- Depress accelerator pedal fully and release it, then wait for 5 seconds.
- If DTC is detected, go to "DIAGNOSIS PROCEDURE ".