Freeze Frame Data and 1st Trip Freeze Frame Data
The ECM has a memory function, which stores the driving condition such as fuel system status, calculated load value, engine coolant temperature, short term fuel trim, long term fuel trim, engine speed and vehicle speed at the moment the ECM detects a malfunction.
Data which are stored in the ECM memory, along with the 1st trip DTC, are called 1st trip freeze frame data, and the data, stored together with the DTC data, are called freeze frame data and displayed on CONSULT-III or GST. The 1st trip freeze frame data can only be displayed on the CONSULT-III screen, not on the GST. For details, refer to "CONSULT-III FUNCTION (ENGINE) ".
Only one set of freeze frame data (either 1st trip freeze frame data or freeze frame data) can be stored in the ECM. 1st trip freeze frame data is stored in the ECM memory along with the 1st trip DTC. There is no priority for 1st trip freeze frame data, and it is updated each time a different 1st trip DTC is detected. However, once freeze frame data (2nd trip detection/MIL on) is stored in the ECM memory, 1st trip freeze frame data is no longer stored. Remember, only one set of freeze frame data can be stored in the ECM. The ECM has the following priorities to update the data.
| Priority | Items | |
|---|---|---|
| 1 | Freeze frame data | Misfire - DTC: P0300 - P0306 Fuel Injection System Function - DTC: P0171, P0172, P0174, P0175 |
| 2 | Except the above items (Includes CVT related items) | |
| 3 | 1st trip freeze frame data | |
Both 1st trip freeze frame data and freeze frame data (along with the DTC) are cleared when the ECM memory is erased.