LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Continuously Variable Transmission (CVT)) >> Service Information >> Shift Control System >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Make sure that parking brake is applied before removal and installation.
  1. Place the selector lever in the "P" position.
  2. Remove the IP center assembly. Refer to INSTRUMENT PANEL ASSEMBLY .
  3. Disconnect the CVT device harness connector.
  4. Remove the key interlock cable from the control device assembly. Refer to "REMOVAL AND INSTALLATION ".
  5. Remove the control cable from the control device assembly.
  6. Remove the nuts and the control device assembly.
scientia non olet · About LEMON Manuals