LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Continuously Variable Transmission (CVT)) >> Service Information >> Shift Position Indicator Circuit >> Diagnosis Procedure >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure: Notes

WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK INPUT SIGNALS

    With CONSULT-III 

    1. Start engine.
    2. Select "MAIN SIGNALS" in "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III and read out the value of "RANGE".
    3. Check that the following three positions or indicators are same.
    • Actual position of the selector lever
    • "RANGE" on CONSULT-III screen
    • Shift position indicator in the combination meter

    OK or NG 

    OK: INSPECTION END 

    NG: Check the following.

scientia non olet · About LEMON Manuals