Hazard and Horn Reminder
When doors are locked or unlocked by remote control of Intelligent Key, Intelligent Key unit sends hazard and horn request signal to BCM via CAN communication line.
BCM flashes hazard warning lamps as a reminder and sends horn chirp signal to IPDM E/R. IPDM E/R sounds horn as a reminder.
The hazard and horn reminder has a horn chirp mode (C mode) and a non-horn chirp mode (S mode).
Operating function of hazard and horn reminder
| C mode | S mode | |||
|---|---|---|---|---|
| Remote control of Intelligent Key operation | Lock | Unlock | Lock | Unlock |
| Hazard warning lamp flash | Twice | Once | Twice | - |
| Horn sound | Once | - | - | - |
Hazard and horn reminders do not operate if any door switch is ON (door is OPEN) and ignition switch is ON.
How to change hazard and horn reminder mode
With CONSULT-III
Hazard and horn reminder can be changed using "HORN WITH KEYLESS LOCK" and "HAZARD ANSWER BACK" mode in "WORK SUPPORT". Refer to "CONSULT-III APPLICATION ITEM ".
Without CONSULT-III
Refer to Owner's Manual for instructions.