LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2007 >> X-Trail LE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> Trouble Diagnosis >> CONSULT-II Function (ENGINE) >> Data Monitor (Spec) Mode >> Monitored Item
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Monitored Item

DATA MONITOR REFERENCE CHART

Monitored item [Unit] ECM input signals Main signals Description Remarks
ENG SPEED [rpm] x  
  • Indicates the engine speed computed from the signal of the crankshaft position sensor (POS) and camshaft position sensor (PHASE).
  
MAS A/F SE-B1 [V] x x
  • The signal voltage of the mass air flow sensor specification is displayed.
  • When engine is running specification range is indicated.
B/FUEL SCHDL [msec]    
  • "Base fuel schedule" indicates the fuel injection pulse width programmed into ECM, prior to any learned on board correction.
  • When engine is running specification range is indicated.
A/F ALPHA-B1 [%]   x
  • The mean value of the air-fuel ratio feedback correction factor per cycle is indicated.
  • When engine is running specification range is indicated.
  • This data also includes the data for the air-fuel ratio learning control.
NOTE: Any monitored item that does not match the vehicle being diagnosed is deleted from the display automatically.
scientia non olet · About LEMON Manuals