April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

WARNING: This page is about a different variant/trim than selected.

CHECK COOLING FAN FUNCTION
With CONSULT-III
1. Turn ignition switch ON.
2. Perform "FAN DUTY CONTROL" in "ACTIVE TEST" mode with CONSULT-III.
3. Make sure that cooling fan speed varies according to the percent.
Without CONSULT-III
1. Perform IPDM E/R auto active test and check cooling fan motors operation, refer to "DIAGNOSIS DESCRIPTION ".
2. Make sure that cooling fan operates.
Is the inspection result normal?

YES : INSPECTION END

NO : Go to "DIAGNOSIS PROCEDURE ".