Component Function Check
WARNING: This page is about a different variant/trim than selected.
- CHECK REFRIGERANT PRESSURE SENSOR OVERALL FUNCTION
- Activate "INSPECTION MODE 1 " to start engine, and warm up engine to normal operating temperature.
- Turn A/C switch and blower fan switch ON.
- Check the voltage between ECM harness connector and ground.VOLTAGE SPECIFICATION
ECM Ground Voltage Connector Terminal E219 39 (Refrigerant pressure sensor signal) Ground 1.0 - 4.0V
Is the inspection result normal?
YES : INSPECTION END
NO : Go to "DIAGNOSIS PROCEDURE ".