LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System (Hybrid)) >> Function Diagnosis >> Electric Ignition System >> System Description >> Input/Output Signal Chart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input/Output Signal Chart

WARNING: This page is about a different variant/trim than selected.
INPUT/OUTPUT SIGNAL CHART

Sensor Input Signal to ECM ECM function Actuator
Crankshaft position sensor (POS) Engine speed
Piston position
Ignition timing control Ignition coil (with power transistor)
Camshaft position sensor (PHASE)
Mass air flow sensor Amount of intake air
Engine coolant temperature sensor Engine coolant temperature
Throttle position sensor Throttle position
Battery Battery voltage
Knock sensor Engine knocking
Brake ECU Vehicle speed(1)
Hybrid vehicle control ECU Vehicle speed(1)
Accelerator pedal position(1)
Shift position(1)
Engine operation command(1) (Engine start request, Engine idle request, Fuel cut request, Engine power request, Engine speed request, etc.)
(1) This signal is sent to the ECM through CAN communication line.