LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Frontier XE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Qr25DE) >> Component Diagnosis >> P2135 TP Sensor >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

NOTE: If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is more than 10V at idle  .

With CONSULT-III

  1. Start engine and let it idle for 1 second.
  2. Check DTC.
  3. If DTC is detected, go to "DIAGNOSIS PROCEDURE ".

With GST

Follow the procedure "WITH CONSULT-III" above.

scientia non olet · About LEMON Manuals