Setting The Vehicle Security System

Initial Condition

• Ignition switch is in OFF position.

Disarmed Phase

• When doors or back door is open, the vehicle security system is set in the disarmed phase on the assumption that the owner is inside or near the vehicle.
• When the vehicle security system is in the disarmed phase, the security indicator lamp blinks every 2.4 seconds.

Pre-armed Phase and Armed Phase

When the following operation 1 or 2 is performed, the vehicle security system turns into the "pre-armed" phase. (The security indicator lamp illuminates for approx. 30 seconds. Then, the system automatically shifts into the "armed" phase.)

1. BCM receives LOCK signal from front door key cylinder switch or keyfob, after back door and all doors are closed.
2. Back door and all doors are closed after front doors are locked by key or door lock and unlock switch.