Data Monitor Mode
Display Item List
DISPLAY ITEM LIST
| Monitor item (Unit) | Remarks |
|---|---|
| BATTERY VOLT (V) | Displays the power supply voltage for EPS control unit. |
| TORQUE SENSOR (Nm) | Displays steering wheel turning force detected by torque sensor. |
| MOTOR SIG (A) | Displays the current commanded value to EPS motor. |
| MOTOR CURRENT (A) | Displays the current value consumed by EPS motor. |
| ASSIST TORQUE (Nm) | Displays assist torque being output by the electric power steering. |
| C/U TEMP (°C) | Displays the temperature of the EPS control unit. |
| ASSIST LEVEL (%) | Normally displays 100%. In case of an excessive stationary steering, the assist curvature gradually falls. However, it return to 100% when left standing. |
| VEHICLE SPEED (km/h) or (MPH) | Vehicle speed is displayed from vehicle speed signal via CAN communication. |
| WARNING LAMP (On/Off) | EPS warning lamp control status is displayed. |
| ENGINE STATUS (STOP/RUN/STALL/CRANK) | Engine speed is displayed from engine status signal via CAN communication. |
| MOTOR TEMP (°C) | Displays the temperature of EPS motor. |
| VHCL SPD CALC (km/h) or (MPH) | Displays vehicle speeds used for controlling EPS. |