Component Inspection

1. Disconnect combination switch (spiral cable) harness connector M352.
2. Check the continuity between combination switch harness connector terminals under following conditions.
   TERMINALS CONTINUITY REFERENCE
   
   

   Combination meter		Condition	Resistance
   Connector	Terminals
   M352	18 and 21	MAIN switch: Pressed	Approx. 0 Ω
   		CANCEL switch: Pressed	Approx. 250 Ω
   		SET/COAST switch: Pressed	Approx. 660 Ω
   		RESUME/ACCELERATE switch: Pressed	Approx. 1,480 Ω
   		All ASCD steering switches: Released	Approx. 4,000 Ω

Is the inspection result normal?

YES: INSPECTION END

NO: Replace ASCD steering switch