LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Body, Lock & Security System) >> Service Information >> Intelligent Key System >> CONSULT-III Application Item >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
DATA MONITOR REFERENCE CHART

Monitor item Content
PUSH SW Indicates [ON/OFF] condition of ignition knob switch.
KEY SW Indicates [ON/OFF] condition of key switch.
DR REQ SW Indicates [ON/OFF] condition of front door request switch LH.
AS REQ SW Indicates [ON/OFF] condition of front door request switch RH.
BD/TR REQ SW Indicates [ON/OFF] condition of trunk opener request switch.
IGN SW Indicates [ON/OFF] condition of ignition switch in ON position.
ACC SW Indicates [ON/OFF] condition of ignition switch in ACC position.
STOP LAMP SW Indicates [ON/OFF] condition of stop lamp switch.
P RANGE SW Indicates [ON/OFF] condition of CVT device (park position switch).
DOOR LOCK SIG(1) Indicates [ON/OFF] condition of door lock signal from Intelligent Key remote control button.
DOOR UNLOCK SIG(1) Indicates [ON/OFF] condition of door unlock signal from Intelligent Key remote control button.
KEYLESS TRUNK(1) Indicates [ON/OFF] condition of trunk open signal from Intelligent Key remote control button.
KEYLESS PANIC(1) Indicates [ON/OFF] condition of panic alarm signal from Intelligent Key remote control button.
DOOR SW DR(1) Indicates [OPEN/CLOSE] condition of front door switch driver side from BCM via CAN communication line.
DOOR SW AS(1) Indicates [OPEN/CLOSE] condition of front door switch passenger side from BCM via CAN communication line.
DOOR SW RR(1) Indicates [OPEN/CLOSE] condition of RR door switch from BCM via CAN communication line.
DOOR SW RL(1) Indicates [OPEN/CLOSE] condition of RL door switch from BCM via CAN communication line.
TRUNK SW(1) Indicates [OPEN/CLOSE] condition of trunk lamp switch from BCM via CAN communication line.
VEHICLE SPEED(1) Indicates [km/h] condition of vehicle speed.
(1) Select "SELECTION FROM MENU".