Component Function Check
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the
Signal Tech II User Guide for additional information.
- Check Intelligent Key relative signal strength
- Confirm vehicle Intelligent Key antenna signal strength
- CHECK INSIDE KEY ANTENNA INPUT SIGNAL
With CONSULT
- Check "ANTENNA" in "Active Test" mode with CONSULT.
- Touch "ROOM ANT1".
- When Intelligent Key is inside instrument panel area antenna detection area, hazard lamps flash.
Test Item Condition Possible cause ROOM ANT1 An excessive high or low voltage from inside antenna is sent to the Intelligent Key Unit - Instrument panel area antenna
- Between Intelligent Key unit and instrument panel area antenna
Is the inspection result normal?
YES: Instrument panel area antenna is OK.
NO: Refer to "DIAGNOSIS PROCEDURE ".