LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Seat) >> Unit Disassembly And Assembly >> Front Seat >> Seatback Assembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Seatback Assembly: Disassembly

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Seats equipped with side air bags can only be serviced as an assembly.
  1. Remove the seatback assembly.
  2. Remove the headrest.
  3. From inside of the seatback, squeeze the headrest holder tabs at the base of the stay pipe and pull up to remove.
    NOTE: Before installing the headrest holder, check its orientation (front/rear and right/left).
    Fig 1: Identifying Headrest Holder Tab
    G04903088Courtesy of NISSAN NORTH AMERICA, INC.
  4. Remove the snap ring and the lumbar support lever knob.
    Fig 2: Identifying Lumbar Support Lever Knob And Snap Ring
    G04903089Courtesy of NISSAN NORTH AMERICA, INC.
  5. Remove the seatback trim and pad assembly.
  6. Remove the hog rings to separate the seatback trim from the pad and the heating element (if equipped).
scientia non olet · About LEMON Manuals