LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2009 >> 350Z Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> Service Information >> Basic Service Procedure >> Exhaust Valve Timing Control Learning >> Operation Procedure >> With CONSULT-III
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With CONSULT-III

  1. Start engine and warm it up to normal operation temperature.
  2. Set shift lever in neutral position and confirm that following electrical or mechanical loads are not applied.
    • Headlamp switch is OFF
    • Air conditioner switch is OFF
    • Rear defogger switch is OFF
    • Steering wheel is in the straight-ahead position, etc.
  3. Keep the engine speed between 1, 800 and 2, 000 RPM.
  4. Select "EXH V/T CONTROL LEARN" in "WORK SUPPORT" mode with CONSULT-III.
  5. Touch "START" and wait 20 seconds.
  6. Make sure that "CMPLT" is displayed on CONSULT-III screen.

    Learning completed : CMPLT 

    Learning not yet : YET