Diagnosis Procedure
- CHECK CONTINUITY HORIZONTAL SYNCHRONIZING (HP) SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect front display unit connector and AV control unit connector.
- Check continuity between front display unit harness connector and AV control unit harness connector.CONTINUITY REFERENCE CHART
Front display unit AV control unit Continuity Connector Terminal Connector Terminal M75 8 M86 68 Existed - Check continuity between front display unit harness connector and ground.CONTINUITY REFERENCE CHART
Front display unit Ground Continuity Connector Terminal M75 8 Not existed Is the inspection result normal?
YES: GO TO 2.
NO: Repair harness or connector.
- CHECK HORIZONTAL SYNCHRONIZING (HP) SIGNAL
- Connect front display unit connector and AV control unit connector.
- Turn ignition switch ON.
- Check signal between front display unit harness connector and ground using an oscilloscope.SIGNAL WAVEFORM REFERENCE CHART
(+) (-) Condition Reference value Front display unit Connector Terminal M75 8 Ground - Is the inspection result normal?
YES: Replace AV control unit.
NO: Replace front display unit.