LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2009 >> 370Z Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio System, Visual System, Navigation System >> BOSE Audio With Navigation >> Component Diagnosis >> RGB Area (YS) Signal Circuit >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

  1. CHECK CONTINUITY RGB AREA (YS) SIGNAL CIRCUIT
    1. Turn ignition switch OFF.
    2. Disconnect front display unit connector and AV control unit connector.
    3. Check continuity between front display unit harness connector and AV control unit harness connector.
      CONTINUITY REFERENCE CHART

      Front display unit AV control unit Continuity
      Connector Terminal Connector Terminal
      M75 9 M86 67 Existed
    4. Check continuity between front display unit harness connector and ground.
      CONTINUITY REFERENCE CHART

      Front display unit Ground Continuity
      Connector Terminal
      M75 9 Not existed

      Is the inspection result normal? 

      YES: GO TO 2.

      NO: Repair harness or connector.

  2. CHECK RGB AREA (YS) SIGNAL
    1. Connect front display unit connector and AV control unit connector.
    2. Turn ignition switch ON.
    3. Check signal between front display unit harness connector and ground using an oscilloscope.
      SIGNAL WAVEFORM REFERENCE CHART

      (+) (-) Condition Reference value
      Front display unit
      Connector Terminal
      M75 9 Ground When RGB image is displayed. Approx. 5.0 V
      When AUX image is displayed.
      G05219862Courtesy of NISSAN MOTOR CO., U.S.A.

      Is the inspection result normal? 

      YES: Replace front display unit.

      NO: Replace AV control unit.

scientia non olet · About LEMON Manuals