Physical Values
TERMINAL DESCRIPTION
| Terminal (Wire color) | Description | Condition | Reference value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||
| 1 (V) | Ground | BOSE amp. ON signal | Output | Ignition switch ON | - | 12.0 V |
| 2 (LG) | 3 (V) | Sound signal front LH | Output | Ignition switch NO | Sound output. | |
| 4 (L) | 5 (R) | Sound signal rear LH | Output | Ignition switch ON | Sound output. | |
| 6 (P) | 15 (B) | Steering switch signal A | Input | Ignition switch ON | Keep pressing SOURCE switch. | 0 V |
| Keep pressing MENU UP switch. | 1.0 V | |||||
| Keep pressing MENU DOWN switch. | 2.0 V | |||||
| Keep pressing <-- icon --> switch. | 3.0 V | |||||
| Keep pressing ENTER switch. | 4.0 V | |||||
| Except for above. | 5.0 V | |||||
| 7 (L) | Ground | ACC power supply | Input | Ignition switch ACC | - | Battery voltage |
| 9 (R) | Ground | Illumination signal | Input | Ignition switch OFF | Lighting switch is OFF. | 0 V |
| Lighting switch is 1ST or 2ND. | 12.0 V | |||||
| 10 | - | Shield | - | - | - | - |
| 11 (L) | 12 (P) | Sound signal front RH | Output | Ignition switch ON | Sound output. | |
| 13 (R) | 14 (G) | Sound signal rear RH | Output | Ignition switch ON | Sound output. | |
| 15 (B) | Ground | Steering switch signal GND | - | Ignition switch ON | - | 0 V |
| 16 (L) | 15 (B) | Steering switch signal B | Input | Ignition switch ON | Keep pressing VOL DOWN switch. | 0 V |
| Keep pressing VOL UP switch. | 1.0 V | |||||
| Keep pressing <-- icon --> switch. | 2.0 V | |||||
| Keep pressing <-- icon --> switch. | 3.0 V | |||||
| Except for above. | 5.0 V | |||||
| 19 (Y) | Ground | Battery power supply | Input | Ignition switch OFF | - | Battery voltage |
| 21 (B) | Ground | Ground | - | Ignition switch ON | - | 0 V |
| 22 (Y) | Ground | Battery power supply | Input | Ignition switch OFF | - | Battery voltage |
| 23 (B) | Ground | Ground | - | Ignition switch ON | - | 0 V |
| 24 (Y) | Ground | Battery power supply | Input | Ignition switch OFF | - | Battery voltage |
| 25 (L) | Ground | ACC power supply | Input | Ignition switch ACC | - | Battery voltage |
| 26 (R) | 27 | Microphone VCC | Output | Ignition switch ON | - | 5.0 V |
| 27 | - | Shield (Microphone ground) | - | - | - | - |
| 28 (G) | 27 | Microphone signal | Input | Ignition switch ON | Make a sound with your voice | |
| 35 (G) | Ground | Ignition signal | Input | Ignition switch ON | - | Battery voltage |
| 36 (O) | Ground | Parking brake signal | Input | Ignition switch ON | Parking brake ON. | 0 V |
| Parking brake OFF. | 5.0 V | |||||
| 37 (O) | Ground | Reverse signal | Input | Ignition switch ON | R position. | 12.0 V |
| Other than R position. | 0 V | |||||
| 38 (Y) | Ground | Vehicle speed signal (8-pulse) | Input | Ignition switch ON | When vehicle speed is approx. 40 km/h (25 MPH). |
NOTE:
Maximum voltage may be 12 V due to specifications (connected units).
|
| 43 (B) | Ground | Ground | - | Ignition switch ON | - | 0 V |
| 48 (L) | - | AV communication signal (H) | Input/Output | - | - | - |
| 49 (P) | - | AV communication signal (L) | Input/Output | - | - | - |
| 50 (LG) | - | AV communication signal (H) | Input/Output | - | - | - |
| 51 (V) | - | AV communication signal (L) | Input/Output | - | - | - |
| 52 (L) | - | CAN-H | Input/Output | - | - | - |
| 53 (P) | - | CAN-L | Input/Output | - | - | - |
| 61 (B) | Ground | RGB image signal (R: red) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 62 (W) | Ground | RGB image signal (G: green) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 63 (R) | 64 | RGB image signal (B: blue) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 64 | - | Shield (RGB ground) | - | - | - | - |
| 65 (G) | 66 (B) | RGB synchronizing signal | Output | Ignition switch ON | - | |
| 66 (B) | Ground | RGB synchronizing signal ground | - | Ignition switch ON | - | 0 V |
| 67 (L) | Ground | RGB area (YS) signal | Output | Ignition switch ON | When RGB image is displayed. | 5.0 V |
| 68 (G) | Ground | Horizontal synchronizing (HP) signal | Input | Ignition switch ON | - | |
| 69 (Y) | Ground | Vertical synchronizing (VP) signal | Input | Ignition switch ON | - | |
| 70 (R) | Ground | Communication signal (CONT→DISP) | Output | Ignition switch ON | When adjusting display brightness. | |
| 71 (G) | Ground | Communication signal (DISP→CONT) | Input | Ignition switch ON | When adjusting display brightness. | |
| 79 (R) | 95 (G) | iPod sound signal LH | Input | Ignition switch ON | When iPod mode is selected. | |
| 80 (B) | 96 (W) | iPod sound signal RH | Input | Ignition switch ON | When iPod mode is selected. | |
| 81 | - | Shield | - | - | - | - |
| 85 (SB) | Ground | Disk eject signal | Input | - | Pressing the eject switch. | 0 V |
| Except for above. | 5.0 V | |||||
| 86 | - | Shield | - | - | - | - |
| 87 (Y) | 88 (L) | AUX sound signal LH | Input | Ignition switch ON | When AUX mode is selected. | |
| 102 (BR) | Ground | Disk eject switch ground | - | Ignition switch ON | - | 0 V |
| 103 (G) | 88 (L) | AUX sound signal RH | Input | Ignition switch ON | When AUX mode is selected. | |
| 105 | - | FM sub | Input | - | - | - |
| 106 | - | AM-FM main | Input | - | - | - |
| 107 | Ground | Antenna amp. ON signal | Output | Ignition switch ON | - | 12.0 V |
| 108 | Ground | Satellite radio antenna signal | Input | Ignition switch ON | Not connected to satellite radio antenna connector. | 5.0 V |
| 109 | - | Shield | - | - | - | - |
| 110 | Ground | GPS antenna signal | Input | Ignition switch ON | Not connected to GPS antenna connector. | 5.0 V |
| 111 | - | Shield | - | - | - | - |