Diagnosis Procedure
- CHECK STEERING SWITCH SIGNAL GND CIRCUIT
- Turn ignition switch OFF.
- Disconnect audio unit connector and TEL adapter unit connector.
- Check continuity between audio unit harness connector and TEL adapter unit harness connector.CONTINUITY REFERENCE CHART
Audio unit TEL adapter unit Continuity Connector Terminal Connector Terminal M82 30 B237 14 Existed - Connect audio unit connector.
Is the inspection result normal?
YES: GO TO 2.
NO: Repair harness or connector.
- CHECK GROUND CIRCUIT
- CHECK STEERING SWITCH
Check steering switch. Refer to "COMPONENT INSPECTION ".
Is the inspection result normal?
YES: INSPECTION END
NO: Replace steering switch.