FRONT DISPLAY UNIT : Diagnosis Procedure
- CHECK FUSE
Check for blown fuses.
FUSES REFERENCE CHARTPower source Fuse No. Battery 34 Ignition switch ACC or ON 19 Is the inspection result normal?
YES: GO TO 2.
NO: Be sure to eliminate the cause of malfunction before installing new fuse.
- CHECK POWER SUPPLY CIRCUIT
Check voltage between display unit harness connector and ground.
VOLTAGE REFERENCE CHARTSignal name Connector No. Terminal No. Ignition switch position Voltage (Approx.) Battery power supply M75 2 OFF Battery voltage ACC power supply 3 ACC Is the inspection result normal?
YES: GO TO 3.
NO: Check harness between display unit and fuse.
- CHECK GROUND CIRCUIT
- Turn ignition switch OFF.
- Disconnect display unit connector.
- Check continuity between display unit harness connector and ground.CONTINUITY REFERENCE CHART
Signal name Connector No. Terminal No. Ignition switch position Continuity Ground M75 1 OFF Existed 13 Is the inspection result normal?
YES: INSPECTION END
NO: Repair harness or connector.