Av Communication System

WARNING: This page is about a different variant/trim than selected.

Solder the repaired parts, and wrap with tape. [Frays of twisted line must be within 110 mm (4.33 in).]

Fig 1: Identifying Repaired Area Soldered And Wrapped With Tape
Courtesy of NISSAN MOTOR CO., U.S.A.
Do not perform bypass wire connections for the repair parts. (The spliced wire will become separated and the characteristics of twisted line will be lost.)

Fig 2: Caution For Do Not Perform Bypass Wire Connections For Repair Parts

Courtesy of NISSAN MOTOR CO., U.S.A.