WITHOUT INTELLIGENT KEY : DTC Inspection Priority Chart
If some DTCs are displayed at the same time, perform inspections one by one based on the following priority chart.
DTC INSPECTION PRIORITY CHART
| Priority |
DTC |
| 1 |
- U1000: CAN COMM
- U1010: CONTROL UNIT (CAN)
|
| 2 |
- B2190: NATS ANTENNA AMP
- B2191: DIFFERENCE OF KEY
- B2192: ID DISCORD BCM-ECM
- B2193: CHAIN OF BCM-ECM
- B2195: ANTI SCANNING
- B2196: DONGLE NG
|
| 3 |
C1735: IGN CIRCUIT OPEN |
| 4 |
- C1704: LOW PRESSURE FL
- C1705: LOW PRESSURE FR
- C1706: LOW PRESSURE RR
- C1707: LOW PRESSURE RL
- C1708: [NO DATA] FL
- C1709: [NO DATA] FR
- C1710: [NO DATA] RR
- C1711: [NO DATA] RL
- C1712: [CHECKSUM ERR] FL
- C1713: [CHECKSUM ERR] FR
- C1714: [CHECKSUM ERR] RR
- C1715: [CHECKSUM ERR] RL
- C1716: [PRESSDATA ERR] FL
- C1717: [PRESSDATA ERR] FR
- C1718: [PRESSDATA ERR] RR
- C1719: [PRESSDATA ERR] RL
- C1720: [CODE ERR] FL
- C1721: [CODE ERR] FR
- C1722: [CODE ERR] RR
- C1723: [CODE ERR] RL
- C1724: [BATT VOLT LOW] FL
- C1725: [BATT VOLT LOW] FR
- C1726: [BATT VOLT LOW] RR
- C1727: [BATT VOLT LOW] RL
- C1729: VHCL SPEED SIG ERR
- C1734: CONTROL UNIT
|