Diagnosis Procedure

CHECK STEERING LOCK RELAY

Check voltage between IPDM E/R harness connector and ground.

VOLTAGE SPECIFICATION

(+)		(-)	Condition		Voltage (V) (Approx.)
IPDM E/R
Connector	Terminal
E14	42	Ground	Ignition switch OFF	A few seconds after opening the driver door	Battery voltage
			Ignition switch LOCK	Press the push-button ignition switch	Battery voltage
			Ignition switch ACC or ON		0

Is the inspection result normal?

YES: GO TO 2.

NO: Replace IPDM E/R. Refer to "REMOVAL AND INSTALLATION ".