LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2009 >> Cube Krom >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System (With Intelligent Key System) >> Ecu Diagnosis Information >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Reference Value >> Physical Values
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Physical Values

CONNECTOR TERMINAL REFERENCE

Terminal NO. (Wire color) Description Condition Value (Approx.)
+ - Signal name Input/Output
1 (R) Ground Battery power supply Input Ignition switch OFF Battery voltage
2 (G) Ground Battery power supply Input Ignition switch OFF Battery voltage
3 (BR) Ground Starter motor Output Ignition switch ON 0 V
At engine cranking Battery voltage
4 (P) Ground Battery power supply Input Ignition switch OFF Battery voltage
5 (LG) Ground Cooling fan relay-1 power supply Output Cooling fan OFF 0 V
Cooling fan operated Battery voltage
7 (Y) Ground Cooling fan relay-2 power supply Output Cooling fan OFF 0 V
Cooling fan LO operated 9.0 V
Cooling fan HI operated Battery voltage
8 (V) Ground Battery power supply Input Ignition switch OFF Battery voltage
9 (B/W) Ground Ground - Ignition switch ON 0 V
10 (L) Ground Cooling fan motor ground Output Cooling fan OFF 0 V
Cooling fan LO operated 5.0 V
Cooling fan HI operated 0 V
13 (W) Ground Rear window defogger Output Ignition switch ON Rear window defogger switch OFF 0 V
Rear window defogger switch ON Battery voltage
19 (B/W) Ground Ground - Ignition switch ON 0 V
21 (W) Ground Front fog lamp (RH) Output Lighting switch 2ND Front fog lamp switch OFF 0 V
Front fog lamp switch ON Battery voltage
22 (V) Ground Front fog lamp (LH) Output Lighting switch 2ND Front fog lamp switch OFF 0 V
Front fog lamp switch ON Battery voltage
24 (G) Ground Oil pressure switch Input Ignition switch ON Engine stopped 0 V
Engine running Battery voltage
25 (Y) Ground Front wiper auto stop Input Ignition switch ON Front wiper stop position 0 V
Any position other than front wiper stop position Battery voltage
26 (P) Ground CAN-L Input/Output - -
27 (L) Ground CAN-H Input/Output - -
28(1) (P) Ground Daytime running light relay-1 control Output Daytime running light deactivated 0 V
Daytime running light activated Battery voltage
30 (SB) Ground Starter relay control Output At engine cranking 0 V
Ignition switch ON Battery voltage
31 (W) Ground Fuel pump relay control Output
  • Approximately 1 second after turning the ignition switch ON
  • Engine running
 0 - 1.5 V
Approximately 1 second or more after turning the ignition switch ON Battery voltage
33 (O) Ground Power generation command signal Output Ignition switch ON Battery voltage
40 % is set on "ACTIVE TEST", "ALTERNATOR DUTY" of "ENGINE"
G04888410Courtesy of NISSAN MOTOR CO., U.S.A.
80 % is set on "ACTIVE TEST", "ALTERNATOR DUTY" of "ENGINE"
G04888411Courtesy of NISSAN MOTOR CO., U.S.A.
34 (R) Ground Horn relay control Output The horn is deactivated Battery voltage
The horn is activated 0 V
36 (O) Ground Parking lamp (LH) Output Ignition switch ON Lighting switch OFF 0 V
Lighting switch 1ST Battery voltage
37 (V) Ground Parking lamp (RH) Output Ignition switch ON Lighting switch OFF 0 V
Lighting switch 1ST Battery voltage
38 (G) Ground Tail lamp (RH) & illuminations Output Ignition switch ON Lighting switch OFF 0 V
Lighting switch 1ST Battery voltage
39 (V) Ground Front wiper HI Output Ignition switch ON Front wiper switch OFF 0 V
Front wiper switch HI Battery voltage
40 (R) Ground ECM relay control Output Ignition switch OFF (More than a few seconds after turning ignition switch OFF) Battery voltage
  • Ignition switch ON
  • Ignition switch OFF (For a few seconds after turning ignition switch OFF)
 0 - 1.5 V
41 (SB) Ground Tail lamp (LH) & license plate lamps Output Ignition switch ON Lighting switch OFF 0 V
Lighting switch 1ST Battery voltage
42 (W) Ground Steering lock unit power supply Output Ignition switch ACC or ON 0 V
Ignition switch ON A few seconds after opening the driver door Battery voltage
Ignition switch LOCK Press the push-button ignition switch Battery voltage
43 (G) Ground ECM relay power supply Output Ignition switch OFF (More than a few seconds after turning ignition switch OFF) 0 V
  • Ignition switch ON
  • Ignition switch OFF (For a few seconds after turning ignition switch OFF)
 Battery voltage
44 (P) Ground ECM relay power supply Output Ignition switch OFF (More than a few seconds after turning ignition switch OFF) 0 V
  • Ignition switch ON
  • Ignition switch OFF (For a few seconds after turning ignition switch OFF)
 Battery voltage
45 (Y) Ground TCM power supply Output Ignition switch OFF Battery voltage
46 (O) Ground Front wiper LO Output Ignition switch ON Front wiper switch OFF 0 V
Front wiper switch LO Battery voltage
47 (BR) Ground Transmission range switch(2) Input Select lever in any position other than P or N (Ignition switch ON) 0 V
Select lever P or N (Ignition switch ON) Battery voltage
Clutch interlock switch(3) Release the clutch pedal 0 V
Depress the clutch pedal Battery voltage
49 (W) Ground Headlamp HI (RH) Output Ignition switch ON Lighting switch OFF 0 V
  • Lighting switch HI
  • Lighting switch PASS
 Battery voltage
Daytime running light activated(1) 7.0 V
50 (GR) Ground Headlamp HI (LH) Output Ignition switch ON Lighting switch OFF 0 V
  • Lighting switch HI
  • Lighting switch PASS
 Battery voltage
Daytime running light activated(1) 7.0 V
51 (R) Ground Headlamp LO (LH) Output Ignition switch ON Lighting switch OFF 0 V
Lighting switch 2ND Battery voltage
52 (P) Ground Headlamp LO (RH) Output Ignition switch ON Lighting switch OFF 0 V
Lighting switch 2ND Battery voltage Daytime running light relay-2(2)
54 (GR) Ground Throttle control motor relay power supply Output Ignition switch OFF (More than a few seconds after turning ignition switch OFF) 0 V
  • Ignition switch ON
  • Ignition switch OFF (For a few seconds after turning ignition switch OFF)
 Battery voltage
55 (P) Ground Fuel pump power supply Output Approximately 1 second or more than after turning the ignition switch ON 0 V
  • Approximately 1 second after turning the ignition switch ON
  • Engine running
 Battery voltage
56 (SB) Ground A/C relay power supply Output Engine running A/C switch OFF 0 V
A/C switch ON (A/C compressor is operating) Battery voltage
57 (G) Ground Throttle control motor relay control Output Ignition switch ON → OFF 0 - 1.0 V
↓
Battery voltage
↓
0 V
Ignition switch ON 0 - 1.0 V
58 (R)(2) (Y)(3) Ground Ignition relay power supply Output Ignition switch OFF 0 V
Ignition switch ON Battery voltage
59 (Y) Ground Ignition relay power supply Output Ignition switch OFF 0 V
Ignition switch ON Battery voltage
60 (V) Ground Ignition relay power supply Output Ignition switch OFF 0 V
Ignition switch ON Battery voltage
61 (W) Ground Ignition relay power supply Output Ignition switch OFF 0 V
Ignition switch ON Battery voltage
62 (L) Ground Ignition relay power supply Output Ignition switch OFF 0 V
Ignition switch ON Battery voltage
64(2) (R) Ground CVT shift selector (Detention switch) Input Ignition switch ON Select lever P 0 V
Select lever in any position other than P Battery voltage
65 (Y) Ground Steering lock unit condition-1 Input Steering lock is activated 0 V
Steering lock is deactivated Battery voltage
66 (L) Ground Push-button ignition switch Input Press the push-button ignition switch 0 V
Release the push-button ignition switch Battery voltage
68 (W) Ground Steering lock unit condition-2 Input Steering lock is activated Battery voltage
Steering lock is deactivated 0 V
69 (O) Ground Ignition relay monitor Input Ignition switch OFF or ACC Battery voltage
Ignition switch ON 0 V
(1) With daytime running light system
(2) CVT models
(3) M/T models
scientia non olet · About LEMON Manuals