TCM Function
The function of the TCM is to:
- Receive input signals sent from various switches and sensors.
- Determine required line pressure, shifting point, and lock up operation.
- Send required output signals to the step motor and the respective solenoids.
TCM FUNCTION CHART
| SENSORS (or SIGNAL) | => | TCM | => | ACTUATORS | ||
| PNP switch Accelerator pedal position signal Closed throttle position signal Engine speed signal CVT fluid temperature sensor Vehicle speed signal Manual mode signal Paddle shifter signal(1) Stop lamp switch signal Primary speed sensor Secondary speed sensor Primary pressure sensor Secondary pressure sensor |
Shift control Line pressure control Primary pressure control Secondary pressure control Lock up control Engine brake control Vehicle speed control Fail-safe control Self-diagnosis CONSULT-III communication line Duet-EA control CAN system On board diagnosis |
Step motor Torque converter clutch solenoid valve Lock up select solenoid valve Line pressure solenoid valve Secondary pressure solenoid valve Manual mode indicator Shift position indicator Stater relay DS mode indicator |
||||
|
||||||