LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2009 >> Maxima S >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Security Control System >> Component Diagnosis >> B210C Starter Control Relay >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

NOTE:
  • If DTC B210C is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
  • If DTC B210C is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".
    DTC DETECTION LOGIC CHART

    DTC No. Trouble diagnosis name DTC detecting condition Possible cause
    B210C START CONT RLY OFF IPDM E/R detects that the relay is stuck at ON position even if the following conditions are met for about 1 second.
    • Starter control relay ON/OFF signal from BCM
    • Clutch interlock or shift park neutral position (PNP) switch input signal
    • IPDM E/R
scientia non olet · About LEMON Manuals