DTC Confirmation Procedure

1. Press push-button ignition switch for 1 second under the following condition.
   • Selector lever is in the P or N position.
   • Do not depress brake pedal.
2. Check "Self diagnostic result" with CONSULT-III.

Is DTC detected? 

YES: Go to "DIAGNOSIS PROCEDURE "

NO: GO TO  2.

1. Insert Intelligent Key into the key slot.
2. Press the push-button ignition switch under the following conditions and wait for at least 1 second.
   • Selector lever is in the P or N position.
   • Do not depress brake pedal.
3. Check "Self diagnostic result" with CONSULT-III.

Is DTC detected? 

YES: Go to "DIAGNOSIS PROCEDURE ".

NO: INSPECTION END