DTC Detection Logic
NOTE:
- If DTC B26E1 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "BCM : DTC LOGIC ".
- If DTC B26E1 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "BCM : DTC LOGIC ".
DTC DETECTING CONDITION AND POSSIBLE CAUSE
| DTC No. | Trouble diagnosis name | DTC detecting condition | Possible cause |
|---|---|---|---|
| B26E1 | NO RECEPTION OF ENGINE STATUS SIGNAL | BCM does not receive the engine status signal from ECM when ignition switch is in ON position | ECM |