Rear View Camera Operation: Notes

When ignition switch is in ON or START position, power is supplied

• through 10A fuse [No. 14, located in the fuse block (J/B)]
• to park/neutral position (PNP) switch terminal 2.

When A/T selector lever is in R position, power is supplied

• through park/neutral position (PNP) switch terminal 4
• to rear view camera control unit terminal 4.

Then, rear view camera control unit sends camera ON signal

• through rear view camera control unit terminal 8
• to rear view camera terminal 1.

An image taken by rear view camera is sent

• through rear view camera terminals 3 and 4
• to rear view camera control unit terminals 9 and 10.

Then an image is sent

• through rear view camera control unit terminals 11 and 12
• to display unit terminals 4 and 15.

An image of rear view will be projected on the display.