Service After Replacing TCM And Transaxle Assembly
Perform the applicable service in the following sheet when replacing TCM or transaxle assembly
CAUTION:
- Do not start the engine until the service is completed.
- "TCM-POWER SUPPLY [P1701]" may be indicated soon after replacing TCM or transaxle assembly (after erasing the memory at the pattern B). Restart the self-diagnosis after erasing the self-diagnosis result. Check that no error is detected.
CVT ASSEMBLY REFERENCE
| TCM | CVT assembly | Service pattern |
|---|---|---|
| Replace the new unit. | Do not replace the unit. | "PATTERN A" |
| Do not replace the unit. | Replace either the old unit or new unit. | "PATTERN B" |
| Replace the old unit. | Do not replace the unit. | |
| Replace either the old unit or new unit. | ||
| Replace the new unit. | Replace either the old unit or new unit. | "PATTERN C" |
NOTE:
Old unit means that the unit has been already used for another vehicle.