Systems Controlled By IPDM E/R

1. Lamp control

   Using CAN communication lines, it receives signals from the BCM and controls the following lamps:

   • Headlamps (High, Low)
   • Parking lamps
   • Tail and license plate lamps
   • Front fog lamps
2. Wiper control

   Using CAN communication lines, it receives signals from the BCM and controls the front wipers.

3. Rear window defogger relay control

   Using CAN communication lines, it receives signals from the BCM and controls the rear window defogger relay.

4. A/C compressor control

   Using CAN communication lines, it receives signals from the ECM and controls the A/C compressor (magnet clutch).

5. Starter control

   Using CAN communication lines, it receives signals from the BCM and controls the starter relay.

6. Cooling fan control

   Using CAN communication lines, it receives signals from the ECM and controls the cooling fan relays.

7. Horn control

   Using CAN communication lines, it receives signals from the BCM and controls the horn relay.

8. Daytime light system control (Canada only)

Using CAN communication lines, it receives signals from the BCM and controls the daytime light relay.