Terminal and Reference Value for Audio Unit (Mid System)
TERMINALS REFERENCE CHART
| Terminal (Wire color) | Item | Signal input/output | Condition | Reference value (Approx.) | Example of symptom | ||
|---|---|---|---|---|---|---|---|
| + | - | Ignition switch | Operation | ||||
| 2 (L) | 3 (W) | Audio sound signal front LH | Output | ON | Receive audio signal | No sound from front door speaker LH or tweeter LH. | |
| 4 (G) | 5 (V) | Audio sound signal rear LH | Output | ON | Receive audio signal | No sound from rear speaker LH. | |
| 6 (P) | Ground | Remote control A | Input | ON | Press Phone/End switch | 0V | Steering wheel audio controls do not function |
| Press SEEK UP switch | 1.7V | ||||||
| Press VOL UP switch | 3.3V | ||||||
| Except for above | 5.0V | ||||||
| 7 (GR) | Ground | ACC signal | Input | ON | Ignition switch ACC or ON | Battery voltage | System does not work properly. |
| 11 (P) | 12 (R) | Audio sound signal front RH | Output | ON | Receive audio signal | No sound from front door speaker RH or tweeter RH. | |
| 13 (L) | 14 (Y) | Audio sound signal rear RH | Output | ON | Receive audio signal | No sound from rear speaker RH. | |
| 15 (LG) | - | Remote control ground | Input | - | - | - | Steering wheel audio controls do not function |
| 16 (L) | Ground | Remote control B | Input | ON | Press Phone/Send switch | 0V | Steering wheel audio controls do not function |
| Press SEEK DOWN switch | 1.7V | ||||||
| Press VOL DOWN switch | 3.3V | ||||||
| Except for above | 5.0V | ||||||
| 19 (Y) | Ground | Battery power | Input | - | - | Battery voltage | System does not work properly. |
| 26 (BR) | 28 (Y) | Audio in | Input | ACC/ON | Receive audio signal | Audio can not be heard. | |
| 27 (GY) | - | Shield ground | - | - | - | 0V | - |
| 30 (R) | - | Mute | Input | - | - | 5.0V | Mute inoperative. |
| 31 (P) | - | CAN-L | - | - | - | - | - |
| 32 (L) | - | CAN-H | - | - | - | - | - |
| 34 (R) | 33 (G) | Audio left channel sound signal from satellite radio tuner | Input | ON | Receive audio signal | No sound from satellite radio tuner left channel. | |
| 36 (B) | 35 (W) | Audio right channel sound signal from satellite radio tuner | Input | ON | Receive audio signal | No sound from satellite radio tuner right channel. | |
| 37 | - | Shield ground (audio signal) | - | - | - | 0V | - |
| 38 | - | Shield ground (data) | - | - | - | 0V | - |
| 40 (L) | Ground | Satellite radio tuner request to audio unit | Input | ON | Turn audio unit ON | 5V | Satellite radio tuner does not operate properly. |
| 41 (LG) | Ground | Audio RX | Input | ON | Receive data | Satellite radio tuner audio information does not display properly. | |
| 42 (V) | Ground | Audio TX | Output | ON | Transmit data | Satellite radio tuner audio information does not display properly. | |
| 45 | - | LED ground | Input | ON | Audio ON | 0V | Display unit will not work. |
| 46 | Ground | LED power line | Output | ON | Audio ON | 9V | |
| 47 | - | LED ground | Input | ON | Audio ON | 0V | |
| 48 | Ground | Serial output | Output | ON | Audio ON | - | |
| 49 | Ground | Reset | Output | ON | Audio ON | 5V | |
| 50 | Ground | Shift clock | Input | ON | Audio ON | - | |
| 51 | Ground | Serial input | Input | ON | Audio ON | - | |
| 52 | Ground | Command data | Input | ON | Audio ON | - | |
| 53 | Ground | Command data | Input | ON | Audio ON | - | |
| 54 | Ground | Display power line | Output | ON | Audio ON | 5V | |
| 55 | - | Display unit ground | Input | ON | Audio ON/OFF | 0V | |
| 56 | - | Display unit ground | Input | ON | Audio ON/OFF | 0V | |