On Board Diagnosis Logic: Notes

WARNING: This page is about a different variant/trim than selected.

This self-diagnosis has the one trip detection logic .

NOTE: If DTC P2138 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643.
Refer to DTC P0643 SENSOR POWER SUPPLY .

DTC DETECTING CONDITION AND POSSIBLE CAUSE

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
P2138 2138	Accelerator pedal position sensor circuit range/performance	Rationally incorrect voltage is sent to ECM compared with the signals from APP sensor 1 and APP sensor 2.	Harness or connector (APP sensor 1 and 2 circuit is open or shorted.) [Crankshaft position sensor (POS) circuit is shorted.] (Refrigerant pressure sensor circuit is shorted.) (EVAP control system pressure sensor circuit is shorted.) (Tumble control valve position sensor circuit is shorted.) Accelerator pedal position sensor (APP sensor 1 and 2) Crankshaft position sensor (POS) Refrigerant pressure sensor EVAP control system pressure sensor Tumble control valve position sensor