LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2010 >> Cube Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0181 To P0607 >> P0340 CMP Sensor (Phase) >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

NOTE: If DTC P0340 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to "DTC LOGIC ".
DTC DETECTING CONDITION AND POSSIBLE CAUSE

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0340 Camshaft position sensor (PHASE) circuit
  • The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking.
  • The cylinder No. signal is not sent to ECM during engine running.
  • The cylinder No. signal is not in the normal pattern during engine running.
  • Harness or connectors

    (The sensor circuit is open or shorted)

  • Camshaft position sensor (PHASE)
  • Camshaft (INT)
  • Starter motor
  • Starting system circuit
  • Dead (Weak) battery