Diagnosis Procedure
- CHECK PCV HOSE CONNECTION
Confirm that PCV hose is connected correctly.
Is the inspection result normal?
YES: GO TO 2.
NO: Repair or replace.
- CHECK INTAKE AIR LEAK
- Start engine and let it idle.
- Listen for an intake air leak after the mass air flow sensor.
Is intake air leak detected?
YES: Discover air leak location and repair.
NO: GO TO 3.
- REPLACE ECM
- Stop engine.
- Replace ECM.
- Perform "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : SPECIAL REPAIR REQUIREMENT ".
INSPECTION END