April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

CHECK ASCD STEERING SWITCH

Disconnect combination switch (spiral cable) harness connector.
Check the continuity between combination switch harness connector terminals under following conditions.

TERMINAL CONDITION REFERENCE CHART

Combination switch		Condition	Resistance
Connector	Terminals	Condition	Resistance
M302	13 and 16	MAIN switch: Pressed	Approx. 0 Ω
		CANCEL switch: Pressed	Approx. 250 Ω
		SET/COAST switch: Pressed	Approx. 660 Ω
		RESUME/ACCELERATE switch: Pressed	Approx. 1, 480 Ω
		All ASCD steering switches: Released	Approx. 4, 000 Ω

Is the inspection result normal?

YES: INSPECTION END

NO: Replace ASCD steering switch