LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2010 >> Cube SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing >> ASCD Brake Switch >> Component Inspection (ASCD Clutch Switch)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection (ASCD Clutch Switch)

  1. CHECK ASCD CLUTCH SWITCH-I
    1. Turn ignition switch OFF.
    2. Disconnect ASCD clutch switch harness connector.
    3. Check the continuity between ASCD clutch switch terminals under the following conditions.
    TERMINAL CONTINUITY REFERENCE CHART

    Terminals Condition Continuity
    1 and 2 Clutch pedal Fully released Existed
    Slightly depressed Not existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: GO TO 2.

  2. CHECK ASCD CLUTCH SWITCH-II
    1. Adjust ASCD clutch switch installation. Refer to "INSPECTION AND ADJUSTMENT ".
    2. Check the continuity between ASCD clutch switch terminals under the following conditions.
    TERMINAL CONTINUITY REFERENCE CHART

    Terminals Condition Continuity
    1 and 2 Clutch pedal Fully released Existed
    Slightly depressed Not existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace ASCD clutch switch.

scientia non olet · About LEMON Manuals