LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2010 >> Sentra SE-R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transmission (CVT) >> Service Information >> Precautions >> Service After Replacing TCM, Transaxle Assembly, or Control Valve >> Pattern A
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pattern A

  1. Shift the selector lever to "P" position after replacing TCM.
  2. Turn ignition switch ON.
  3. Check that the shift position indicator in the combination meter turns ON (It indicates approximately 1 or 2 seconds after turning ignition switch ON.)
    • Check the following items if shift position indicator does not turn ON. Repair or replace accordingly as necessary.
      • The harness between TCM and ROM ASSY in transaxle assembly is open or shorted.
      • Terminals disconnected, loose, or bent from connector housing.
scientia non olet · About LEMON Manuals