LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2011 >> Cube Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTC P0507 Through DTC P2A00 (For CALIFORNIA) >> DTC P0850: PNP Switch >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. PERFORM COMPONENT FUNCTION CHECK
    1. Turn ignition switch ON.
    2. Check the voltage between ECM harness connector and ground under the following conditions.
      VOLTAGE REFERENCE CHART

      ECM Ground Condition Voltage
      Connector Terminal
      F7 14 (PNP signal) Ground Selector lever P or N (CVT)
      Neutral (M/T)
      Approx. 0 V
      Except above Battery voltage

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Go to "DIAGNOSIS PROCEDURE ".