DTC Detection Logic
DTC DETECTING CONDITION CHART
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| P2004 |
Tumble control valve stuck |
The target angle of tumble control valve controlled by ECM and the input signal from tumble control valve position sensor is not in the normal range. |
- Harness or connectors (Tumble control valve motor circuit is open or shorted.)
(Tumble control valve position sensor circuit is open or shorted.)
(EVAP control system pressure sensor circuit is open or shorted.)
[Crankshaft position sensor (POS) circuit is shorted.)
(Accelerator pedal position sensor circuit is shorted.)
(Refrigerant pressure sensor circuit is shorted.)
(Battery current sensor circuit is shorted.)
- Tumble control valve actuator (Tumble control valve motor)
(Tumble control valve position sensor)
- EVAP control system pressure sensor
- Crankshaft position sensor (POS)
- Accelerator pedal position sensor
- Refrigerant pressure sensor
- Battery current sensor
|