LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2011 >> Cube Krom >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> [With Intelligent Key System] >> DTC/Circuit Diagnosis >> DTC B2603: Shift Position >> Component Inspection [CVT Shift Selector (Detention Switch)]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection [CVT Shift Selector (Detention Switch)]

  1. CHECK CVT SHIFT SELECTOR (DETENTION SWITCH)
    1. Turn ignition switch OFF.
    2. Disconnect CVT shift selector connector.
    3. Check continuity between CVT shift selector (detention switch) terminals.
      TERMINAL CONTINUITY REFERENCE CHART

      CVT shift selector (detention switch) Condition Continuity
      Terminal
      7 8 Selector lever P position Not existed
      Other than above Existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace CVT shift selector. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals