DTC Detection Logic
NOTE:
- If DTC B2605 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
"DTC LOGIC
".
- If DTC B2605 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
"DTC LOGIC
".
DTC DETECTION CONDITION CHART
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B2605 |
PNP/CLUTCH SW |
When ignition switch is ON, N range signal input and shift position signal (CAN) input from IPDM E/R do not match. |
- Harness or connectors (Transmission range switch circuit is open or shorted)
- Transmission range switch
- IPDM E/R
- BCM
|