DTC Detection Logic
NOTE:
- If DTC B26F3 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
"DTC LOGIC
".
- If DTC B26F3 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
"DTC LOGIC
".
DTC DETECTION CONDITION CHART
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B26F3 |
START CONT RLY ON |
BCM requests IPDM E/R to turn starter control relay OFF but starter control relay OFF state signal is not transmitted from IPDM E/R. |
IPDM E/R |