LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2011 >> Cube SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTC P0181 Through P050E (Except For CALIFORNIA) >> DTC P0500: VSS >> Except For M/T Models >> EXCEPT FOR M/T MODELS: Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EXCEPT FOR M/T MODELS: Diagnosis Procedure

  1. CHECK DTC WITH TCM

    Check DTC with TCM. Refer to "CONSULT-III FUNCTION (TRANSMISSION) ".

    Is the inspection result normal? 

    YES: Go to 2.

    NO: Perform trouble shooting relevant to DTC indicated.

  2. CHECK DTC WITH ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

    Check DTC with ABS actuator and electric unit (control unit). Refer to "CONSULT-III FUNCTION ".

    Is the inspection result normal? 

    YES: Go to 3.

    NO: Perform trouble shooting relevant to DTC indicated.

  3. CHECK DTC WITH COMBINATION METER

    Check DTC with combination meter. Refer to "CONSULT-III FUNCTION (METER/M&A) ".

    Is the inspection result normal? 

    YES: Go to 4.

    NO: Perform trouble shooting relevant to DTC indicated.

  4. CHECK OUTPUT SPEED SENSOR

    Check output speed sensor. Refer to "DIAGNOSIS PROCEDURE ".

    Is the inspection result normal? 

    YES: Go to 5.

    NO: Replace or replace error-detected parts.

  5. CHECK WHEEL SENSOR

    Check wheel sensor. Refer to "DIAGNOSIS PROCEDURE ".

    Is the inspection result normal? 

    YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

    NO: Replace or replace error-detected parts.

scientia non olet · About LEMON Manuals